Resizing and converting a folder of photos: digiKam, XnConvert, RapidRAW and more

digiKam’s free batch queue resizes, converts, renames with a preview, watermarks and removes location data on all three desktop systems, once your photos are in its library. XnConvert, a close second, does the same in one recipe with no library to set up; RapidRAW is our Rising Star.

PRACTICAL PICKSPreferredPickOur Preferred PickFree delivery copies on any desktop system$0

digiKam

A free, open-source photo manager whose batch queue resizes, converts, renames with a preview, watermarks and removes location or other metadata, on Windows, Mac and Linux.

Your photos and the output folder must be in a digiKam library, and its resize step may enlarge photos smaller than the target. Its lead over XnConvert is narrow.

Why digiKam is our Pick
PRACTICAL PICKSRisingStarOur Rising StarFree export presets with a logo watermark$0

RapidRAW

A free, open-source photo editor first released in June 2025 whose export presets resize, rename by template, add a logo watermark and remove GPS data on Windows, Mac and Linux.

It cannot open HEIC photos from phones, its installers are not code-signed, and it is 17 months old with one main developer.

Why RapidRAW earned Rising Star

Who is this article for? Anyone preparing copies of a folder of their own photographs for a client, website or archive at a set size, format and naming pattern, sometimes with a watermark or without location data, on a Windows, Mac or Linux computer.

About 39 min read

What Preferred Pick, Rising Star and Ready to Rock mean

The quick list

digiKam, RapidRAW and darktable cost nothing for any use; XnConvert and XnView MP are free at home. Compare what a business pays, then which delivery steps each tool documents and how it treats existing files.

Published license prices checked November 12, 2026; not checkout quotes. digiKam (GPL), RapidRAW (AGPL-3.0; its optional Cloud subscription is only for AI object removal) and darktable: no fee for any use. XnConvert: free for private, educational and non-profit use; €15.00 for one company license, falling to €6.50 each for 100 or more. XnView MP: free for private and educational use; €29.00 for one company license. Tools that scored lower are described in the article. Taxes and payment fees not checked.

The comparison at a glance

Compare which delivery steps each tool documents, what happens to existing files and originals, metadata control and the license a business needs.

Order follows our verdict for repeatable delivery copies, not measured speed or image quality; darktable and XnView MP carry no label. All tools remain selectable.

Desktop tools for batch resizing and converting photographs
FeaturedigiKamRapidRAWXnConvertdarktableXnView MP
Best fitPreferred Pick: free delivery copies on Windows, macOS or Linux, from photos kept in a digiKam libraryRising Star: free export presets that resize, rename, add a logo and remove GPS, in a newer photo editorAlso consider: one saved recipe for any folder, with no photo library to set upFree export presets in a RAW editor, for photos imported into its libraryThe XnConvert batch module inside a photo browser, for readers who also want a viewer
Desktop platformsWindows 10 or later; macOS 11.3 or later on Apple silicon, 10.15 or later on Intel; Linux AppImageWindows 10 or later (x64 and ARM64); macOS 13 or later on Apple silicon or Intel; Linux packages and Flathub. Installers are not code-signed64-bit Windows 10/11, macOS (Intel and Apple silicon), 64-bit Linux; older builds for Windows 7/8 and macOS 10.13–12Windows (x64 and ARM); macOS 13.5 or later on Apple silicon only; Linux AppImage. Windows and Mac show security warnings on first launchWindows 10 and 11, macOS and Linux, 64-bit
License for business useGPL open source: no fee for any useAGPL open source: no fee for any use; optional paid Cloud only for AI object removal€15.00 for one company license, down to €6.50 each from 100; free for private, educational and non-profit useOpen source: no fee for any use€29.00 for one company license, down to €3.90 each from 1,000; free for private and educational use
WatermarkText or image, sized and placed as a percentage of each photo, with opacity, rotation or repeated placementLogo image placed at a corner, edge or center, scaled to the photo, with opacity; no text watermark in the export panelText or image, with position and opacitySVG or PNG file, or text with variables, scaled to the image, with opacity and rotationThrough the batch module, as in XnConvert; not separately documented on its page
RenamingAdvanced Rename patterns; the queue lists every target name before the runTemplate with the original name, a sequence number and capture date and timePatterns with counters, dates or metadata fieldsTemplate with variables such as file name, sequence number and capture dateA separate Batch Rename tool; outputs are named through the batch module
When an output name already existsStore under a different name, overwrite or skip, chosen beforehand; it does not ask during the runAdds -1, -2 to the new file’s name; never overwrites silently, its documentation saysAsk, replace, skip or rename, as described by forum users; not in XnSoft’s guidesUnique name, overwrite after one confirmation, overwrite if changed, or skipNot documented on its product page
MetadataRemove Exif, IPTC or XMP in full or by part, including GPS; apply a copyright templateKeep (the default) or drop all; a separate switch removes only GPS; TIFF exports carry none (open report)Keep, edit or remove EXIF, IPTC and XMP, including GPSChoose Exif, metadata, GPS, tags and edit history per export, or exclude single fields; AVIF, HEIF and JPEG XL take all or nothingMetadata editing for IPTC and XMP; EXIF, IPTC and XMP supported

Desktop batch copies of photographs you own: resizing, conversion, renaming, watermarks and metadata, not editing individual pictures. Public-source research checked October 19 and 20 and November 12, 2026: no installs, conversions, output inspection or network monitoring by us. Order follows our verdict for repeatable delivery copies, not measured speed or image quality; darktable and XnView MP carry no label and appear because they score in the top four. Tools that scored lower, such as IrfanView, Converseen and Lightroom Classic, are described in the article. Write to an empty folder, keep originals elsewhere and check a few sample copies before the whole folder. Next substantive review: December 18, 2026.

All features and sources 16 criteria

Open the groups that matter to you. They compare the same selected tools. “Planned” means future work, not an available feature. Sources include the published conditions.

Fit, platforms and cost

Show 5 criteria
Fit, platforms and cost
FeaturedigiKamRapidRAWXnConvertdarktableXnView MP
Best fitPreferred Pick: free delivery copies on Windows, macOS or Linux, from photos kept in a digiKam libraryRising Star: free export presets that resize, rename, add a logo and remove GPS, in a newer photo editorAlso consider: one saved recipe for any folder, with no photo library to set upFree export presets in a RAW editor, for photos imported into its libraryThe XnConvert batch module inside a photo browser, for readers who also want a viewer
Desktop platformsWindows 10 or later; macOS 11.3 or later on Apple silicon, 10.15 or later on Intel; Linux AppImageWindows 10 or later (x64 and ARM64); macOS 13 or later on Apple silicon or Intel; Linux packages and Flathub. Installers are not code-signed64-bit Windows 10/11, macOS (Intel and Apple silicon), 64-bit Linux; older builds for Windows 7/8 and macOS 10.13–12Windows (x64 and ARM); macOS 13.5 or later on Apple silicon only; Linux AppImage. Windows and Mac show security warnings on first launchWindows 10 and 11, macOS and Linux, 64-bit
Current release, checked November 12, 20269.1.0, June 7, 2026; still current on November 121.6.9, November 7, 2026; about 70 releases since June 20251.118.0, October 12, 2026, still the newest on November 12; no change list published5.6.2, a bug-fix release in October 2026; still current on November 12Version not read; product page read November 12, 2026
License for business useGPL open source: no fee for any useAGPL open source: no fee for any use; optional paid Cloud only for AI object removal€15.00 for one company license, down to €6.50 each from 100; free for private, educational and non-profit useOpen source: no fee for any use€29.00 for one company license, down to €3.90 each from 1,000; free for private and educational use
Who makes itdigiKam team in the KDE community; open sourceTimon Käch, Switzerland, with about 60% of contributions; open source. Its Cloud service is run by Latent GmbHXnSoft; closed sourcedarktable volunteer team; open sourceXnSoft; closed source
Sources for fit, platforms and cost

Checked October 19 to 20 and November 12, 2026: digiKam downloads and news; RapidRAW README, releases and privacy policy; XnConvert product, downloads and prices and release files; XnView MP product page and prices; darktable install page. Prices are published offers, not checkout quotes; taxes and invoice terms not checked. Maintainer shares come from GitHub contributor counts.

Batch steps

Show 5 criteria
Batch steps
FeaturedigiKamRapidRAWXnConvertdarktableXnView MP
ResizingLongest side to a preset or custom pixel length, or a percentage; photos smaller than the target may be enlargedLong edge, short edge, width or height in pixels, or a percentage; option not to enlargePixels, percentage or longest side, with aspect ratio keptMaximum width and height in pixels, cm or inches, or a scale factor; you choose whether to enlargeThrough the same batch module as XnConvert; resize options not separately documented on its page
Repeatable recipeTools run top to bottom in an order you can change; queues saved as workflows; no preview of each tool’s effect; photos must be in a digiKam albumFixed sequence of edits, resizing and encoding, with watermark and borders; named export presetsUp to 80 chained actions in order; saved presets; watched foldersExport presets, several in one run; a watermark is added through a style applied at export; photos must be imported firstSame batch module as XnConvert, whose chained actions and saved presets we read for XnConvert; its own page does not describe saved settings
WatermarkText or image, sized and placed as a percentage of each photo, with opacity, rotation or repeated placementLogo image placed at a corner, edge or center, scaled to the photo, with opacity; no text watermark in the export panelText or image, with position and opacitySVG or PNG file, or text with variables, scaled to the image, with opacity and rotationThrough the batch module, as in XnConvert; not separately documented on its page
RenamingAdvanced Rename patterns; the queue lists every target name before the runTemplate with the original name, a sequence number and capture date and timePatterns with counters, dates or metadata fieldsTemplate with variables such as file name, sequence number and capture dateA separate Batch Rename tool; outputs are named through the batch module
FormatsReads JPEG, HEIF, AVIF, JPEG XL, WebP and camera RAW, depending on the build; saves JPEG, PNG, TIFF, WebP, AVIF, HEIF, JPEG 2000 or PGFReads JPEG, PNG, TIFF, WebP, JPEG XL and camera RAW, not HEIC; saves JPEG, PNG, TIFF, WebP, AVIF or JPEG XLReads 500+, writes about 70; “Same as original” saves JPEG when the source format cannot be writtenReads JPEG, PNG, TIFF, JPEG XL and camera RAW, with WebP in some builds; HEIC not listedReads more than 500 formats; exports about 70
Sources for batch steps

Maker-documented: digiKam batch queue overview, queue settings, base tools, watermark tool, image formats and resize tool source, an archived GitHub copy; RapidRAW batch export, file formats and export panel source; XnConvert batch FAQ and tutorial; XnView MP product page; darktable export, watermark and file formats. Documented features, not tested output; missing documentation does not by itself establish absence. Source files are main-branch code, not installed builds.

Originals, metadata and risk

Show 6 criteria
Originals, metadata and risk
FeaturedigiKamRapidRAWXnConvertdarktableXnView MP
When an output name already existsStore under a different name, overwrite or skip, chosen beforehand; it does not ask during the runAdds -1, -2 to the new file’s name; never overwrites silently, its documentation saysAsk, replace, skip or rename, as described by forum users; not in XnSoft’s guidesUnique name, overwrite after one confirmation, overwrite if changed, or skipNot documented on its product page
Options that change originalsOnly if you save into the source album and choose overwrite; its library can also write tags into originals, depending on settingsExport never changes originals; edits are kept in small sidecar files beside photos you adjust“Delete original” option; leave it offExports are new files; edits are kept in its database and sidecar filesNot documented on its product page
MetadataRemove Exif, IPTC or XMP in full or by part, including GPS; apply a copyright templateKeep (the default) or drop all; a separate switch removes only GPS; TIFF exports carry none (open report)Keep, edit or remove EXIF, IPTC and XMP, including GPSChoose Exif, metadata, GPS, tags and edit history per export, or exclude single fields; AVIF, HEIF and JPEG XL take all or nothingMetadata editing for IPTC and XMP; EXIF, IPTC and XMP supported
Processing and privacy statementsRuns on your computer with no account; we found no separate privacy statement for the programMaker says the program sends no photos or usage data; it checks GitHub for updates; Cloud edits send a masked cropXnSoft says desktop processing stays on your computer; its online converter is a separate productRuns on your computer with no account; privacy statements not reviewed hereNot reviewed beyond the product page
Vulnerability recordNo digiKam advisory found; Fedora tracks April 2026 LibRaw flaws against digiKam, and whether 9.1.0 includes the fixes is unconfirmedCVE-2026-64816, a credential leak through a crafted preset on Windows, fixed in 1.6.0 (July 2026); no GitHub advisoriesNVD: one entry, a registration-field crash in version 1.82No 2026 NVD entry or GitHub advisory found (October 19)Not checked
Recent public reportsJuly 2026 report of 9.1.0 freezing on Windows; no open report of the batch queue losing filesOpen reports: images wider than 16,384 pixels exported without edits while reporting success; TIFF exports without metadataFlathub build left temporary filenames (reproduced September 2026); AppImage failed to start under Wayland (October 2026)Its manual warns that embedding metadata in exports can fail without notice; no batch-export reports reviewedNone reviewed
Sources for originals, metadata and risk

digiKam queue settings, metadata tools, Fedora LibRaw tracker, Windows report and open batch-queue reports; RapidRAW batch export, file formats, privacy policy, VulnCheck advisory, security advisories, large-image report and TIFF metadata report; XnConvert existing-file options described by a forum user, batch FAQ, Flathub report, AppImage report and NVD record; darktable export; XnView MP product page. Privacy statements are the publishers’ own; we did no network audit. NVD counts come from its public interface. Source interfaces are main-branch code, not installed builds.

What matters when choosing

digiKam is our Practical Pick for preparing delivery copies of a folder of photographs you own on a Windows, Mac or Linux computer, resized, converted, renamed and, when needed, watermarked or stripped of location data, if you are willing to keep those photos in a digiKam library. It is free and open source, including for business use. Its Batch Queue Manager applies a list of tools to every photo, top to bottom in an order you can change, and saves that list as a workflow for the next delivery. Its documented tools cover each step: resizing to a longest side, a text or image watermark sized as a percentage of each photo, removing GPS location or other Exif, IPTC and XMP data, adding a copyright template, and saving as JPEG, PNG, TIFF, WebP, AVIF or HEIF. The queue lists every new filename before you run it. The most important compromise is setup: the queue takes photos from digiKam albums and saves into an album, so the folder you work from and the folder you deliver from must first belong to a digiKam collection, which it scans into its own database. Its resize tool, as we read its source code, scales every photo to the size you set, so a photo smaller than that size may be enlarged; check small images. Batch queue overview, queue settings, watermark tool, metadata tools, resize tool source

This is a narrow lead: consider XnConvert if you want one saved recipe for any folder, with no photo library to set up. Under our fixed weights digiKam scores 4.20 and XnConvert 4.10. Half a point less for digiKam on the delivery recipe, our most heavily weighted criterion, would reverse the order, and giving that criterion 40% of the weight leaves digiKam ahead by only 0.025. digiKam stays ahead of every product we scored whether we count price differences more lightly or more heavily, but XnConvert is the closest. XnConvert documents the same steps in one ordered recipe of up to 80 actions and works on any folder you add, on Windows, macOS and Linux. It is free for private, educational and non-profit use; a company needs a license, listed at €15.00 for one. Some of its output behavior needs checking on a sample: its “Same as original” format setting saves as JPEG when the source format cannot be written, what happens when an output name already exists is described by forum users rather than in XnSoft’s own guides, and its Linux packages have had problems this autumn. XnConvert, batch converter FAQ, forum description of existing-file options, Flathub output report

RapidRAW is our Rising Star: a free, open-source photo editor, first released in June 2025, whose export presets resize, rename, add a logo watermark and remove GPS data on Windows, Mac or Linux. Its documentation describes resizing by long edge, short edge or percentage with an option not to enlarge, filename templates with a sequence number and capture date, a logo scaled to each photo, a switch that removes only GPS location while keeping other camera data, and exports that never overwrite an existing file. It scored 3.70 under our fixed weights, against digiKam’s 4.20, with medium-low confidence. The closest newer tool we found, Kiln, a desktop batch processor in public beta since July 2026 whose price is not yet published, we estimate would still score just below RapidRAW even if it were free, so RapidRAW’s lead is narrow; chaiNNer, the other newer tool for this job, is still labelled alpha. The main limits: RapidRAW cannot open HEIC photos from phones, its installers are not code-signed, and it is 17 months old with one main developer. Batch export, file formats, releases

darktable (3.98) and XnView MP (3.79) complete our top four and appear in the chart without a label. darktable documents complete export settings for photos you have first imported into its RAW editor; XnView MP is XnSoft’s photo browser, whose batch converter is the same module that powers XnConvert. On Windows, IrfanView is worth a look when you want a light tool that shows the new filenames before anything is written, and Converseen when a business needs a small free tool only to resize, convert and rename; both, with Lightroom Classic and three other paid or Windows-only tools, are described in “How we researched” because they scored lower.

These are researched judgments from vendor documentation, source code, license pages, release records, vulnerability records and user reports; prices and releases were checked again on November 12, 2026. We installed nothing, processed no photographs and measured neither speed nor image quality. Three conditions would change our recommendation: you want no photo library (choose XnConvert); you work only on Windows and want a light tool that previews new names (IrfanView); or a business must avoid any fee and needs no watermark, retained metadata or library (Converseen). Whichever you choose, write to an empty folder away from your originals, leave any option that moves, renames, deletes or overwrites originals switched off, and convert a few copies first: a portrait and a landscape photo, one smaller than your target size, two files with the same name from different folders, and one of each input format. Check the dimensions, orientation, names, watermark and metadata before running the whole folder. A second folder protects against a mistaken setting; it is not a backup.

digiKam

Preferred Pick · free delivery copies on any desktop system

$0GPL · no fee for any use

Choose digiKam when you want resizing, conversion, renaming with a preview, a watermark and location removal in one saved batch queue, free, on Windows, Mac or Linux, and you do not mind keeping the photos in a digiKam library. Its lead over XnConvert is narrow.

Reasons to choose it

  • Every delivery step in one saved queue you can reorder
  • Lists each new filename before the run
  • Removes GPS or other metadata selectively and adds a copyright template

What to watch

  • Photos and the output folder must be in a digiKam library
  • Its resize step may enlarge photos smaller than the target
  • No preview of each tool’s effect before the run

digiKam is an open-source photo manager from the KDE community, free for any use under the GNU General Public License. We verified on November 12, 2026 that version 9.1.0, released June 7, 2026, is still the current stable release, with downloads for 64-bit Windows 10 or later, macOS 11.3 or later on Apple silicon and 10.15 or later on Intel, and a Linux AppImage; the project signs its files with its own GnuPG key. Its manual covers JPEG, HEIF, AVIF, JPEG XL and WebP files and camera RAW through the LibRaw library, though which formats work depends on the libraries in your build. Downloads, 9.1.0 release, image formats

Its useful difference is a free batch queue that covers every step of a delivery. The Batch Queue Manager applies a list of tools to each photo from top to bottom, in an order you can drag to change, and a queue can be saved as a workflow and replayed for the next client. Resize scales each photo so its longest side matches a preset or custom pixel length, or a percentage. Add Watermark places text or an image, sized and positioned as a percentage of each photo, with opacity and rotation, at one spot or repeated across the frame. Convert tools save JPEG, PNG, TIFF, WebP, AVIF, HEIF, JPEG 2000 or PGF. Renaming uses the patterns of digiKam’s Advanced Rename tool, and the queue shows each original filename beside its target name before you run it. Choose it if you want all of that free, including for business use, on any of the three desktop systems. Batch queue overview, base tools, watermark tool, queue settings

Read the full digiKam analysis and sources

Metadata control is broad. A Remove Metadata tool deletes all Exif, IPTC or XMP data, or only parts such as GPS location, dates, Windows keywords or captions; Apply Metadata Template adds copyright and contact details; and other tools set captions, titles and labels. The manual does not say how fully each output format keeps the metadata you leave alone, so open one output file in a metadata viewer before relying on it. Metadata tools

The strongest reason not to choose it is the library it needs. The queue takes photos from digiKam albums and saves its results into an album, either the photos’ own album or another one, so both folders must be part of a digiKam collection, which digiKam scans into its own database; open feature requests ask for a free choice of output folder. If a target file already exists, the queue stores the new file under a different name, overwrites the old one or skips it, as set beforehand, and does not ask while running. Choose a separate album and “Store as a different name”: with the photos’ own album and “Overwrite automatically”, a photo whose name and format stay the same could be replaced. The manual says batch tools cannot preview their effect, and the resize tool’s source code scales every photo to the length you set, so a photo smaller than that length may be enlarged rather than left alone; the GitHub copy we read has been archived since February 2022, so we could not confirm that 9.1.0 behaves the same way. Queue settings, open batch-queue requests and reports, base tools, resize tool source, archived GitHub copy

Outside the batch queue, digiKam’s library can write tags, captions and ratings into your original files or into sidecar files, depending on its metadata settings, so check those settings before you tag anything. RAW decoding relies on LibRaw: several LibRaw flaws that a specially crafted file could trigger were published in April 2026, and Fedora’s tracker for one of them in its digiKam package was still marked new on November 12, 2026. digiKam 9.1.0 bundles a LibRaw version dated May 23, 2026, and we could not confirm which fixes it contains; the risk concerns RAW files from unknown sources rather than your own photos. In July 2026 one user reported 9.1.0 freezing for about 30 seconds at a time on Windows while rating grouped RAW and JPEG files. We found no open report of the batch queue losing or overwriting files. Fedora tracker, Windows report, 9.1.0 release

Used digiKam? Share your experience to help other readers choose.

RapidRAW

Rising Star · a newcomer worth considering

$0AGPL-3.0 · optional Cloud for AI removal

Why Rising Star? First released in June 2025, it is the highest-scoring newer tool we could rate for this job: its free export presets resize, rename, add a logo watermark and remove GPS data on Windows, Mac and Linux. No HEIC support, unsigned installers and a short track record are the limits. This is not our broader Ready to Rock endorsement.

Consider RapidRAW if you also edit your photos and want free export presets that resize, rename, add a logo and strip GPS on Windows, Mac or Linux. Convert HEIC phone photos first, and check a few exports after each update.

Reasons to choose it

  • Resizes by long edge, with an option not to enlarge
  • Logo watermark scaled to each photo; filename templates
  • Never overwrites an existing file, its documentation says

What to watch

  • Cannot open HEIC photos
  • Installers are not code-signed; Macs need a Terminal command first
  • Seventeen months old, with one main developer and frequent changes

RapidRAW is a free, open-source editor for camera RAW and ordinary image files, licensed under the AGPL-3.0. Timon Käch, a developer and photographer in Lucerne, Switzerland, first released it in June 2025 and remains its main developer; 91 contributors are listed on its repository. It has published about 70 releases since then, the latest, 1.6.9, on November 7, 2026, with installers for Windows 10 or later on x64 and ARM, for macOS on Apple silicon or Intel, and packages for Linux. It counts as a newer entrant here because it entered this market 17 months ago and does not come from an established maker of photo software. Repository and README, releases

Its export panel covers a delivery recipe. According to its documentation, a batch export can resize by long edge, short edge, width or height in pixels or by percentage, with a “Don’t enlarge” option; build filenames from a template with the original name, a sequence number and the capture date and time; place a logo image at a corner, edge or center, scaled to the photo and faded to an opacity you choose; keep camera metadata or drop it, with a separate switch that removes only GPS location; and save JPEG, PNG, TIFF, WebP, AVIF or JPEG XL. A setup can be saved as a named export preset. The documentation says a name clash adds -1, -2 and so on, and that RapidRAW “never overwrites a destination file silently”. The export panel’s source code has the same controls. Choose it if you also want to correct your photos before delivery and want the export side free on Windows, Mac or Linux. Batch export, file formats, export panel source

Read the full RapidRAW analysis and sources

The strongest reason not to choose it is what it cannot open or promise yet. Its format list has no HEIC or HEIF, so iPhone photos in that format must be converted first. The export watermark takes an image, such as a transparent PNG logo; we found no text watermark in the export panel. A report from October 16, 2026, open when we last checked on October 20, says an image wider than 16,384 pixels, a stitched panorama, was exported without its edits while the program reported success. Another, from September 20, says TIFF exports carry no metadata, which the source code marks as a temporary limitation; the same report says JPEG, PNG and WebP exports keep full Exif data since versions 1.6.2 and 1.6.4. The notes for version 1.6.9 mention better TIFF exports that include Exif data, but the page we read cut them off and we did not check whether that closes the report. Edits are kept in small .rrdata sidecar files that RapidRAW creates beside a photo the first time you adjust it. File formats, large-image report, TIFF metadata report

Its installers were not code-signed in the release notes we read (1.6.4 and 1.6.6): Windows may show a SmartScreen warning, and on a Mac you must remove the quarantine flag with a Terminal command, as the release notes explain, or macOS may report the app as damaged. A flaw fixed in version 1.6.0 in July 2026, CVE-2026-64816, let a crafted preset leak Windows login credentials over the network; current releases are not affected, and the project lists no security advisories of its own. Its privacy policy, effective September 20, 2026, says the desktop program sends no photos, edits or usage statistics to its maker, asks GitHub for updates when it opens and downloads its local AI models from Hugging Face on first use. Only the optional paid Cloud service, run by Latent GmbH in Kriens, Switzerland, receives a crop around an area you mask, for AI object removal. RapidRAW is 17 months old, releases often and depends mainly on one developer, so keep a version that works and check a few exports after each update. 1.6.6 release notes, VulnCheck advisory, security advisories, privacy policy

Used RapidRAW? Share your experience to help other readers choose.

XnConvert

Also consider · one recipe, no photo library

Free–€15Free at home · €15 per company license

Choose XnConvert when you want one saved recipe to resize, convert, rename and, where required, watermark or strip location data for any folder, without setting up a photo library. Convert a few sample copies before the whole folder.

Reasons to choose it

  • Resize, watermark, rename and metadata steps in one saved preset
  • The same release for Windows, macOS and Linux
  • Keeps, edits or removes EXIF, IPTC and XMP, including GPS

What to watch

  • A company needs a license, €15.00 for one
  • “Same as original” saves JPEG when the source format cannot be written
  • Recent Linux package bugs; no change list for 1.118

XnConvert is XnSoft’s desktop batch processor, built on the same conversion engine as its XnView MP viewer. We verified that version 1.118.0 files for Windows, macOS and Linux were posted on October 12, 2026, and that it was still the newest release on November 12. The product page offers that release for 64-bit Windows 10 and 11, macOS on Intel or Apple silicon, and 64-bit Linux (Ubuntu 22.04, Debian 11.6, RHEL 8.6 or later), and keeps older builds for Windows 7 and 8 and macOS 10.13 to 12. XnSoft says it reads more than 500 formats, including HEIC, AVIF, JPEG XL and camera RAW, and writes about 70. Product and downloads, release files, batch converter FAQ

Its useful difference is a single ordered recipe that works on any folder you add, with no library to set up. The vendor documents chaining up to 80 actions, applied top to bottom to every file: resizing by pixels, percentage or longest side with the aspect ratio kept; cropping and rotation; text or image watermarks with adjustable opacity and position; filename patterns with counters, dates or metadata fields; and metadata actions. The whole batch, including output format and quality settings, can be saved as a preset for the next delivery, and watched folders can apply a recipe to new files automatically. Its strongest reason not to choose it is that it is closed-source software whose detailed output behavior is partly documented only by its users. Batch tutorial, batch converter FAQ, product page

Read the full XnConvert analysis and sources

Check the output settings on a sample. XnSoft’s tutorial says the default “Same as original” format tries to save in the source format and uses JPEG when that is not possible, so a mixed folder can produce a different format than you expect; reading a format is not the same as writing it. Errors and warnings appear in a Status tab. Forum users describe an Output-tab choice for files that already exist (ask, replace, skip or rename) and a “Delete original” option. A 2015 report, acknowledged by the developer in January 2016, said rename-on-conflict overwrote files when “Delete original” was also selected; we found nothing showing whether that combination behaves differently today. Choose skip or rename for existing files and leave “Delete original” off. Batch tutorial, existing-file options, 2015 report

XnSoft says metadata preservation is an Output-tab option and that separate actions can edit, copy or remove EXIF, IPTC and XMP fields, including GPS coordinates. Decide which you need: a client may want camera and copyright data kept, while a public gallery may need location removed. Open one output file in a metadata viewer before relying on either setting. The vendor also says the desktop program runs entirely on your computer with nothing uploaded, and offers a separate browser converter for a few files; that statement is the vendor’s, not a network audit by us, and we could not establish whether the program checks for updates. XnSoft’s published privacy policy, dated 2013, covers its mobile apps, not this desktop program. Batch converter FAQ, XnSoft privacy policy

The license is free for private, educational and non-profit use; use in a company requires a paid license, listed at €15.00 for one and falling to €6.50 each for 100 or more (read again November 12, 2026). We did not view a checkout, taxes or invoice terms. A freelancer delivering client work should treat that as business use rather than private use. License and prices

Linux packaging has been the weak point this autumn. A September 2026 forum report showed the Flathub build leaving converted files as hidden temporary files; the developer reproduced it, recommended the TGZ or DEB packages and said he had contacted the Flatpak maintainer. An October 2026 report described the 1.117 AppImage failing to start under Wayland, with a workaround offered. Releases are frequent, with 1.115 to 1.118 between August and October 2026, but no change list was posted for 1.118; a user asked for one on October 18. The National Vulnerability Database lists one XnConvert entry, a crash in the registration-code field of version 1.82. Flathub report, AppImage report, 1.118 announcement, NVD record CVE-2019-25328

Used XnConvert? Share your experience to help other readers choose.

darktable

Free export presets in a RAW editor

$0Open source · no fee

Consider darktable’s export if you already develop photos in it: presets resize, rename, choose which metadata to keep, and can add a watermark through a style.

Reasons to choose it

  • Per-export choice of Exif, GPS, tags and other metadata
  • Several export presets in one run
  • Asks once before any overwrite

What to watch

  • Photos must be imported, and every export passes through its editing pipeline
  • No HEIC listed; Macs need Apple silicon
  • A watermark needs a style set up first

darktable is a free, open-source RAW photo editor maintained by volunteers. We verified on November 12, 2026 that version 5.6.2 is the current release, with installers for Windows on x64 and ARM, for macOS 13.5 or later on Apple silicon, and Linux AppImages; there are no official builds for Intel Macs, and the project explains how to get past security warnings on Windows and macOS. Its manual lists JPEG, PNG, TIFF, JPEG XL and camera RAW files among those it imports, with WebP in some builds; HEIC is not listed. Install page, supported file formats

Its export module covers a delivery recipe for photos imported into its library. You set a maximum width and height in pixels, centimeters or inches, or a scale factor, and choose whether smaller photos may be enlarged. A filename template takes variables such as a sequence number. On a name clash it can create a unique name, overwrite after a single confirmation, overwrite only if changed, or skip. A metadata dialog chooses, for each export, whether to include Exif data, descriptive metadata, GPS, tags and edit history, and can exclude single fields; for AVIF, HEIF and JPEG XL output it includes all of them or none. Several presets can run in one export. A watermark is a processing module that overlays an SVG or PNG file or text, scaled to the image; to add it to a whole batch you apply a style containing it at export. Export, watermark

Read the full darktable analysis and sources

It scored 3.98 under our fixed weights, third overall, and carries no label. Every export passes through darktable’s development pipeline, a watermark needs a style prepared first, photos must be imported, it lists no HEIC support and its Mac version needs Apple silicon. Choose it for delivery copies if you already develop your photos in darktable.

Used darktable? Share your experience to help other readers choose.

XnView MP

Photo browser with the XnConvert batch module

Free–€29Free at home · €29.00 per company license

Consider XnView MP if you want a viewer for your photo folders as well as the batch converter that powers XnConvert. We read only its product page, so convert a few sample copies before a whole folder.

Reasons to choose it

  • Its Batch Convert is the same module as XnConvert’s
  • Separate Batch Rename tool and metadata editing for IPTC and XMP
  • Windows, macOS and Linux; reads more than 500 formats

What to watch

  • A company needs a license, €29.00 for one
  • Saved batch settings and existing-file handling are not described on its page
  • About twice XnConvert’s license price for the same batch engine

XnView MP is XnSoft’s image viewer and photo manager for Windows 10 and 11, macOS and Linux, from the maker of XnConvert. We read only its product page, on November 12, 2026. The page says its Batch Convert is “the same module” that powers XnConvert, and lists batch rename, a timestamp changer and metadata editing for IPTC and XMP beside it; it reads more than 500 image formats, exports about 70 and supports EXIF, IPTC and XMP metadata. A browser for your folders sits around the batch tool, so you can look through the originals and the delivery copies without a library to set up. Product page

It is free for private and educational use, including non-profit organizations; use in a company needs a license, listed at €29.00 for one and falling to €3.90 each above 1,000, about twice XnConvert’s €15.00 for one. It scored 3.79 under our fixed weights, fourth overall, and carries no label. Because we read only the product page, we scored it a notch below XnConvert on the delivery recipe and on platforms: the page does not describe saved batch settings, watched folders or how existing files are handled in XnView MP itself, and the forum reports we found about XnConvert’s existing-file options and Linux packages concern the same conversion module, which we did not check against XnView MP. Choose it if you also want a viewer for your photo folders; choose XnConvert if you want only the batch tool. Product page and prices

Used XnView MP? Share your experience to help other readers choose.

Which product are we missing?

Know a product that belongs in this article? Tell us what it does differently and why it deserves a closer look. Newcomers welcome.

Readers and product teams can suggest candidates. Suggestions inform our research; they do not guarantee inclusion or a recommendation.

Suggest a product

Opens an email draft with this article attached as a link. Nothing is sent until you send it.

No email app? Send the product name, website, and this article’s title to admin@practicalpicks.guide.

What people are saying

User reports are a check on vendor claims, not a measured reliability score. XnConvert’s own forum shows its recent problems clearly. In September 2026 a first-time user on Ubuntu found converted HEIC files left under hidden temporary names; the developer reproduced the problem in the Flathub build the next day. In October a Kubuntu user reported the AppImage failing to start under Wayland, and another found “Remove original” failing on a pooled mergerfs drive, which he traced to the file system rather than XnConvert. On October 18 a user asked where the 1.118 change list was. An older thread from 2011 about two inputs producing the same output name was resolved, and the 2015 report about rename-on-conflict with “Delete original” was acknowledged by the developer; both are historical. Flathub report, AppImage report, mergerfs report, 1.118 announcement, 2011 name-collision thread, 2015 report

A digiKam user with about 1,500 photos reported in July 2026 that 9.1.0 on Windows often froze for about 30 seconds while rating grouped RAW and JPEG files. RapidRAW’s issue tracker carries the open reports described above, about very large images and TIFF metadata; a September 2026 report of GPS data missing from exported Sony RAW files was followed by the reporter finding GPS embedded correctly in a build from the current code. digiKam report, RapidRAW GPS report

An IrfanView community discussion from 2025, read September 6, 2026, asked how to size and place a batch watermark across images of different dimensions; Reddit blocked our automated check on October 19. Converseen’s metadata report includes the user’s workaround: restoring the lost fields afterwards with ExifTool. These are self-selected reports with no representative denominator. We used no star averages or testimonials. Our searches on October 19 and 20, and our checks of release pages on November 12, for vulnerabilities, ownership changes, shutdowns and disputes involving these programs found nothing beyond the items in this article; a search that finds nothing is not proof that nothing exists. IrfanView discussion, Converseen report

How we researched

This is public-source research. We did not install or run any program, convert or inspect any photograph, time a batch or monitor network traffic. No developer supplied access, payment or input, and we use no affiliate links. We first compared XnConvert, IrfanView and Converseen on September 6, 2026, rechecked every material claim on October 19, researched digiKam, RapidRAW, darktable, Lightroom Classic and other widely used tools on October 20, and on November 12, 2026 read current price, release and platform pages again, added XnView MP and other tools, and searched again for newer tools. We used the same kinds of sources throughout: maker documentation and source code, release pages, privacy policies, security advisories and trackers, issue trackers and forums, and a few independent guides.

We wrote this for someone preparing copies of a folder of their own photographs for a client, website or archive, at a set size, format and naming pattern, sometimes with a watermark or without location data. We fixed six criteria and their weights before comparing: delivery steps in one recipe (30%), protection of originals and existing files (20%), metadata control (15%), platform and format coverage (15%), license cost for business use (10%) and maintenance and trust (10%). For cost we compared what one person would pay for a business license over three years with what the other tools cost, so a free tool scores 5 and a price near the middle of the tools we compared scores 3.5. The totals are digiKam 4.20, XnConvert 4.10, darktable 3.98, XnView MP 3.79, Lightroom Classic 3.75, RapidRAW 3.70, Capture One 3.55, IrfanView 3.40, BatchPhoto 3.25, Converseen 3.23 and ACDSee Photo Studio Home 2.77. digiKam’s lead over XnConvert is 0.10, less than the 0.30 weight of the delivery recipe, so it is narrow: it rests on our half-point judgments that digiKam’s batch queue, which needs a photo library and may enlarge small photos, still documents nearly as complete a recipe as XnConvert, and that its vendor-documented existing-file choices and name preview protect originals better than XnConvert’s forum-documented options. Its lead over darktable is 0.225, also below 0.30 and so also narrow. digiKam stays first when price differences count more or less, and when protection of originals, cost, metadata or a Windows-only reader is weighted more heavily; weighting the recipe at 40% leaves it ahead of XnConvert by only 0.025; a resize-and-rename-only job puts Converseen higher. XnView MP’s fourth place is narrow too: Lightroom Classic is 0.04 behind it and would replace it if price differences counted somewhat more.

Tools outside the chart, with their totals. Adobe Lightroom Classic (3.75) is Adobe’s desktop RAW editor and catalog. Adobe’s plan page on November 12, 2026 showed US$119.88 a year prepaid for the Lightroom plan that includes it, or US$11.99 a month on an annual commitment billed monthly; Adobe’s terms say a prepaid year cannot be refunded if you cancel early. Version 16.0 is current, for Windows 10 or 11 and macOS; there is no Linux version. A 2019 guide by Rob Sylvan describes six ways of resizing, filename templates, text or graphic watermarks, metadata options that can remove person and location information, and four choices for existing files, “Ask What to Do” being the safest, and says exports cannot overwrite the source photos; in November 2023 a user reported an original deleted by exporting into its own folder under its own name, and Adobe said its December 2023 updates fixed it. Photos must first be imported into a catalog. Adobe’s bulletin APSB26-94 of August 2026 fixed critical Windows vulnerabilities in 15.4 and earlier, and in March 2026 the US Justice Department announced a $150 million settlement with Adobe over subscription sign-ups and cancellations. Adobe plans, subscription terms, what’s new, export guide, 2019, 2023 report, Justice Department announcement

Capture One Pro (3.55, low confidence) runs on Windows and Mac and sells a perpetual license at $349 or a subscription shown at $18.00 a month (Capture One’s pricing page, November 12, 2026). Its support pages blocked our reader on October 20, so its process recipes, which set size, naming and metadata for several outputs at once, are described from a 2015 independent guide and a search summary of a vendor article. Pricing, independent guide, 2015

IrfanView (3.40) is Irfan Skiljan’s Windows image viewer with batch conversion, renaming and a combined mode; version 4.76 (September 18, 2026) is current, for Windows XP to 11 in 32-bit, 64-bit and ARM64 builds. “Run test rename” shows the result of a rename pattern without renaming anything, and the help warns that a bad pattern combined with moving or renaming originals and overwriting can remove input files and against using the input folder as the output folder. Advanced options cover resizing within a maximum width and height, a custom processing order, a watermark image with corner offsets and transparency (batch text through the advanced options), and saved profiles. HEIC photos open only after you install Microsoft’s HEIF and HEVC extensions or another codec, EXIF is kept for JPEG output, and we could not establish a documented way to remove location data while keeping other fields. Plugins carry most of the security risk: the National Vulnerability Database lists 187 IrfanView entries published in 2024 and 2025, nearly all about parsing particular file types, and none in 2026 when we checked. It is free for private, non-commercial use and for schools, museums, libraries and charities; the official German page lists €15 net for one perpetual single-user business license, with discounts from 11, while the English license text says to ask by email for prices. Release history, batch help, watermark help, FAQ, EULA, license price, NVD example, CVE-2025-7325

BatchPhoto Pro (3.25, low confidence), from Bits&Coffee, runs on Windows and Mac, resizes, converts, renames, adds date stamps and, in the Pro edition meant for company use, watermarks; it costs $59.95 for a lifetime license with a year of free updates, though the purchase page shows $49.95 beside that price. We found no documentation of its metadata controls on the pages we read. Purchase page

PrepBatch (3.52, low confidence) is a batch tool for Macs only (macOS 14 or later), sold in the Mac App Store for $4.99 one time. Its listing, read October 19, 2026, claims resizing in several modes, cropping, conversion between JPEG, PNG, HEIC, TIFF, WebP and AVIF, keeping or stripping EXIF and GPS data, text or logo watermarks, rename patterns that handle name clashes by numbering, skipping or overwriting, saved recipes and a Finder Quick Action. We found no ratings or independent coverage, and it runs only on a Mac. Mac App Store listing

Converseen (3.23) is Francesco Mondello’s open-source batch converter, licensed under GPLv3 or later, so a business pays nothing to use it. Version 0.15.2.9 was released October 5, 2026 and is still current. It has signed Windows installers and portable builds, Linux AppImages and distribution packages, FreeBSD builds and an unsigned macOS beta. It converts, resizes, rotates and flips images and renames them with a prefix, suffix or progressive number; its current interface asks, skips or overwrites existing files, with a warning that overwriting permanently deletes the old file (source-code evidence from the main branch, not an installed copy). The strongest reason not to choose it is what it leaves out: a request for watermarks has been open since June 2019, and its only metadata control is a “Remove image’s metadata” checkbox; in an April 2025 report, still open, a user lost camera EXIF data converting Canon RAW files to WebP and AVIF with that box unchecked, and the developer said metadata handling depends on ImageMagick. Development rests mainly on one maintainer. README, releases, watermark request, metadata report

ACDSee Photo Studio Home (2.77, low confidence) is a Windows 10 and 11 photo manager and editor whose page lists batch resizing, renaming, format conversion and watermarks; its perpetual 2027 license costs $69.99 (on sale at $59.95 until November 18, 2026), and the page does not say whether the Home license covers business use. We read only the product and purchase pages. Product page, purchase page

We did not score FastStone Photo Resizer (Windows; free for personal and educational use) or IMBatch (Windows; free for personal use): both document graphical batch resizing, renaming and watermarks, but neither page shows a business price, so their cost is unknown and they stay unranked; even with a free license neither could reach the top four. We did not score ImageMagick or NConvert, which work only from the command line, Caesium Image Compressor, which compresses and resizes without renaming patterns or watermarks, or Windows PowerToys Image Resizer and the conversion built into macOS, which only resize or convert. We read the prices of Adobe Bridge, Photoshop, Affinity, Photo Mechanic and Fotosizer but not enough of their batch features to score them. FastStone, IMBatch

On November 12, 2026 we searched again for newer tools for this reader, using Hacker News, GitHub searches and topic pages, an alternatives directory and the candidates screened earlier. We counted a tool as newer if it was first released within the last 24 months and does not come from an established maker of this kind of software, and, because this reader may use Windows or a Mac, only if it runs on both and is not labelled alpha. RapidRAW, first released in June 2025, scored highest and is our Rising Star. Kiln, a desktop batch processor for Windows, macOS and Linux announced on Hacker News in July 2026, is in public beta with a pipeline of resizing, conversion, watermark, renaming and metadata steps and says all processing stays on your computer; its maker’s page names no company, shows no source code or terms and has not announced a price, and we found no independent coverage, so we could not rate it fully until it publishes a price, and even if it were free we estimate it would score just below RapidRAW. chaiNNer, a node-based image processor for Windows, Mac and Linux, labels every release alpha. Resiza and PicForge only resize; WebPrepImage runs only on Windows; PrepBatch, Convert & Compress, BatchMark Pro and Batch Photo Editor run only on a Mac, and PixelFree only on Windows. Other GitHub results were browser tools or projects with no identifiable maker. New tools from established software companies count as alternatives, not newcomers. Kiln, chaiNNer releases

ToolPublic sourcesWhat remains uncertain
digiKamBatch queue manual pages (overview, queue settings, base tools, metadata tools, watermark), image formats page, resize tool source (archived GitHub copy), download page and news read November 12, 9.1.0 release news, KDE bug lists, Fedora tracker, KDE Discuss report.Whether 9.1.0 behaves as the archived resize source says, whether 9.1.0’s LibRaw includes the April 2026 fixes, metadata kept per output format, default metadata-writing settings, how its natural-language search works.
RapidRAWREADME, releases through 1.6.9 (November 7, 2026), batch export and file formats documentation, export panel source, privacy policy, GitHub security advisories, VulnCheck advisory, issue tracker.Whether filename templates and watermark behave as documented in installed builds, TIFF metadata after 1.6.9, whether installers are still unsigned, long-term maintenance.
XnConvertProduct and license page and release directory read November 12, batch FAQ, tutorial, developer forum reports, NVD.Existing-file handling in vendor documentation, the 1.118 changes, Linux package fixes, network behavior, metadata fidelity per format.
darktableInstall page read November 12, export, watermark and supported-formats manual pages.HEIC support in official builds, how its default processing changes ordinary JPEGs, privacy statements.
XnView MPProduct page and license prices, read November 12.Saved batch settings, watched folders and existing-file handling in XnView MP itself, release and package history.

None of this establishes image quality, speed or metadata fidelity on your photographs. Next substantive review is due December 18, 2026, or sooner after a major release or a fix to the Linux packaging problems. Found a changed release or behavior? Contact the editors.

Sources and evidence

Sources for digiKam, RapidRAW, XnConvert, darktable and XnView MP were checked on October 20 and November 12, 2026, and for IrfanView, Converseen and the other tools named above on the dates given, unless another date is given. Vendor material establishes documented features, published prices and the publisher’s own statements, not behavior on your computer. Prices are published offers, not checkout quotes; euro prices are the makers’ own. Forum and issue posts are attributed reports, not representative samples.

This is a researched comparison, not a product review. Method: evidence standard, editorial picks.